ARMOUR HP — Chemical Resistant Anti Corrosion Paint – High Performance
High-performance coating for fertilizer, chemical & paper industries
Formerly known as: CRAC HP — Chemical Resistant Anti Corrosion Paint - High Performance Paint (As Patented)
Our HP coating is designed for applications in the fertilizer, chemical & paper industries, delivering rapid performance with a 6 hrs dry time per coat in a 2-coat system. It offers superior resistance to UV, acids/alkali, and water, ensuring long-term durability in aggressive environments. With strong adhesion on metal and non-metal surfaces (except rubber) and 60 sq. ft./kg coverage, HP provides a reliable, high-performance protective solution for critical industrial areas.
- Single component — no mixing required
- Touch dry in 15 minutes
- 6-hour recoat interval for reliable throughput
- Superior UV, acid, alkali & water resistance
Overview
Usage
- Applied on all metal and non-metal structures except rubber.
- Protective coating against acid, alkali, UV resistant, and water resistant in aggressive industrial environments.
- Used in both dip-side and vapour-side areas across chemical and industrial facilities.
Advantages
- Single-component — no mixing or specialist equipment required
- Primer — ARMOUR SB
- Touch drying in 15 minutes for fast throughput
- Time Interval Between Primer And Top Coat – 6 Hours
- Superior resistance to acids, alkalis, UV, and water
- Excellent adhesion to all metal and non-metal surfaces (except rubber)
- High coverage rate — 60 sq.ft per kg
Packaging
Applications
Fertilizer, Chemical, Paper, Zinc melting, Phosphatic slurry unit, Zinc slurry unit, Molten sulfur handling unit, Acetic acid unit, Textile, Rayon Manufacturing
Product Details
| Chemical | Max. Conc. |
|---|---|
| HCl | 35% |
| H₂SO₄ | 50% |
| HNO₃ | 50% |
| H₃PO₄ | 83% |
| HF | 40% |
| Acetic Acid | 99% |
- Patented formulation — intellectual property protected
- Solvent-free, low VOC — environmentally responsible
- Safe for use in ETP and STP facilities
Application
ARMOUR HP can be applied by brush, roller, or airless spray. No thinning is required. Apply in ambient temperature between 10 °C and 40 °C with relative humidity below 85%. Do not apply on wet surfaces or when rain is expected within 4 hours.
Minimum 2 coats recommended for all industrial environments.
- 1
Surface Preparation
Clean the surface thoroughly — remove rust, oil, grease, dust, and loose particles. Abrade to Sa 2.5 (blast) or St 3 (hand tool). Ensure surface is dry and free from contamination.
- 2
Application Method
Apply by brush, roller, or airless spray. For best results on porous surfaces, apply a thin first coat and allow to flash off before applying the second coat.
- 3
First Coat
Apply ARMOUR SB uniformly at 40–60 microns DFT. Touch dry in 15 minutes at 25 °C. Allow minimum 6 hours before applying subsequent coats.
- 4
Second Coat
Apply second coat ARMOUR HP at the same DFT. Ensure full coverage with no pinholes or holidays.